mystaircalculator.com logo mystaircalculator.com
  1. Home
  2. Calculators
  3. Conversion & Unit Tools
Category 10 of 10

Conversion & Unit Tools Calculators

Quick-reference converters for the numbers that come up mid-project — angle to slope percent, inches to millimeters, rise/run ratio to degrees, roof pitch versus stair angle, board feet, and concrete volume. Pure unit math, not full project planning — for that, start with a Core Geometry calculator instead.

6
Calculators in this category
93
Total on the site
2
Sub-groups below
$0
Cost to use

Search all 93 calculators by name — not just this category.

Commonly searched

Three conversions people look up most

If you're mid-project and just need a fast number, these are the conversions that come up most often before you dig into the rest of the category.

📏
Imperial ↔ metric

Inches to MM Stair Converter

Quick imperial-metric conversion for all stair dimensions.
📐
Degrees → percent

Stair Angle to Slope Percent Converter

Converts stair angle in degrees to a slope percentage.
🧱
Volume units

Cubic Yard Concrete Converter

Converts concrete stair volume between cubic feet, yards, and meters.
All 6 calculators

Browse by conversion type

Grouped into two practical sets — angle and slope notation, and material or unit conversions.

Angle & Slope Conversions 3

📐
Degrees → percent

Stair Angle to Slope Percent Converter

Converts stair angle in degrees to a slope percentage.
📊
Ratio → angle

Rise/Run Ratio to Degrees Converter

Converts a rise-run ratio directly to an angle in degrees.
🏠
Roof vs. stair

Roof Pitch vs Stair Angle Comparison

Side-by-side reference between roof pitch and stair angle notation.

Units & Materials 3

📏
Imperial ↔ metric

Inches to MM Stair Converter

Quick imperial-metric conversion for all stair dimensions.
🪵
Linear → board ft

Board Feet Lumber Calculator

Generic linear-feet-to-board-feet conversion utility — distinct from the project-specific 2x12 Stringer Board and Tread/Riser Material calculators.
🧱
Volume units

Cubic Yard Concrete Converter

Converts concrete stair volume between cubic feet, yards, and meters.
FAQ

Common questions about stair conversions

What's the difference between this category and the geometry calculators?
These tools are pure unit math — turning a number you already have into a different notation, like degrees into slope percent or inches into millimeters. The Core Geometry & Layout calculators instead plan a full staircase from scratch using your target rise, run, and step count.
How is Rise/Run Ratio to Degrees different from Stair Angle to Slope Percent?
Rise/Run Ratio to Degrees takes a ratio (like 7:11) and returns an angle. Stair Angle to Slope Percent starts from an angle and returns a slope percentage instead. Use whichever matches the number you already have on hand.
I need lumber for the stringers specifically — is Board Feet Lumber Calculator the right tool?
Board Feet Lumber Calculator is a generic linear-feet-to-board-feet converter for any cut of lumber. If you want stringer sizing built specifically for stair stringers, use the 2x12 Stringer Board Calculator instead.
Does Cubic Yard Concrete Converter also tell me how many bags of concrete I need?
No — it only converts a known volume between cubic feet, yards, and meters. For a full concrete stair pour, including bag counts and rebar, use the Concrete Stairs Calculator in Material-Specific Structural.
Keep going

Browse the other 9 categories

Once your unit or notation is sorted, these are the natural next stops — full layout planning, structural sizing, materials, railing, code checks and cost.

📐Core Geometry & Layout 10 🌀Stair Types & Styles 15 🏗️Structural & Load Engineering 7 🧰Material-Specific Structural 11 🎨Materials, Finishing & Cut-Lists 10 🛡️Railing, Baluster & Safety 7 📋Code Compliance 8 💲Cost & Estimating 10 ✨Specialty & Accessories 9